Heritage & Savoir-Faire Part 2: The Concord C1 Tourbillon

English Reviews & Reports By Watchonista - The Watches Network
Forum kuralları
Watchonista: The Online Community Dedicated To The Watch World

In Combining a Social Network of Likeminded Individuals with a Specialized Search Engines Watchonista is Creating an Entertaining, Enriching and Unparalleled Online Watch World.

You Can Reach Exclusive Watchonista Content Directly From Watchonista Turkey Partner TSF

Heritage & Savoir-Faire Part 2: The Concord C1 Tourbillon

Mesaj pifpaf » 16 Tem 2012, 17:49

At first glance, it is a bit surprising to see a brand like Concord, with its super-modern designs and its cyberpunk inspirations, featured in our "Savoir Faire and Heritage" summer-school.

Resim

But it is the first time I can access such comprehensive information, regarding the production of a watch. Moreover, the creation of a nonconformist watch such as the Black Spider, allows us to put many savoir-faire into perspective.

Resim

From the cutting out on numerical control machines to the assembly, through the electroplating and the gemsetting, we will detail the sum of work it takes to produce a Concord C1 BlackSpider Brilliant.

Resim

Before discovering the detail of the fabrication process, one should know that this piece is a unique (already sold?).
The titanium case makes 47mm in diameter for 13.55mm in thickness.
The bridge bearing the movement is made of eight distinct parts, and spreads out on the bezel: the "Spider" effect is rather successful, even though it works better on the case-back or on the Blackspider without diamonds.
The gems, fitted on four of the spider's legs, somewhat overshadow the so peculiarly skeletonized movement.

Resim

The Blackspider is fitted with a Concepto movement: the C8000 tourbillon is emblematic of their production.
For that matter, the photo of its barrel locking device illustrates the subcontractor's catalog.
The back side of this distinctive piece is unmistakable; on the contrary, the gemsetting on the front side allows the association of the diverse parts to be coherent.
It is quite a bulky movement of 14 lignes 1/4 aka 32.6mm, which is a very suitable size to fill the big watches of the nowadays market. The one-minute tourbillon is set at 21600v/h, with a 72-hour power reserve.
This very open skeleton shows most of the working mechanism, which makes the winding process especially didactic.
One sees the watch living its everyday life; therefore, a power reserve indicator would be absolutely superfluous.

Resim

The highlight of this watch is of course the aesthetical link between the bezel and the skeleton. If one could criticize the Concord bezel, one has to admit that when the concept is taken to its limits, the watch reaches another aesthetical dimension.
In order to perfect the look, the inner bezel ring has been machined accordingly.

Resim

Resim

Resim

Resim

The other stumbling block of the machining process is the titanium case; as you most certainly know, this metal is particularly difficult to work with: because of its hardness, the high friction can set it to fire.
Therefore, very few brands transform it themselves. Here, the machining of the Blackspider's case takes more than seven hours, with CNC machines specially design to prevent fire hazards.
The bezel is the trickiest part to cut out, as it takes a five axes numerical control machine.

Resim

Resim

The gemsetting is of course the highlight of this unique piece. As the watch features an almost rough natural element, finding the gems of the right size is a fastidious task.
The next step is the diamonds cleavage; it is like splitting a log. There is a right orientation, with produces two cleanly cut stones. And there is a wrong one, where the diamond will break. If the splitting is properly done, it allows for the elimination of the flaws, which are generally located at the center of the gem.
Then, the diamond undergoes the bruting process, whereby the stone is ground with a diamond mill (of a higher hardness), down to its final shape.
Finally, the most difficult operation, the polishing, where the diamond gets all its facets and its brilliance. This step is performed manually, but of course, the diamond cutter uses a "Dop" (pliers) and a disc turning between 3000 and 4000 revs/min; But surprisingly, he also uses a computer, to guide his movements accurately.
The gems are set using the "grain setting", which is one of the most resistant techniques.
The operation is particularly difficult on the flange, because of the thinness of the material (about 1mm):
Once all the parts are cut out and set, the bridges can be finished. Then, the electroplating is performed. Finally, all the blackened parts are ready to be fitted together.
The previous steps have been properly executed, all the dimensions are perfect. The assembling process is the simplest of all, but at the same time it is the most critical: the task is carefully performed, because if unfortunately a part is scratched or damaged, it must be replaced by a new one.

Resim

Resim

Resim

To produce this C1 Blackspider, set with 224 brilliants, it took a least as many craftsmen and hundreds of hours of work. Because this is the strength of watchmaking: The "Swissness". Many centuries of savoir-faire and unbelievable skills to be able to wear a few tens of grams of happiness.

Resim

Resim

Resim
Kullanıcı avatarı
pifpaf
 
Mesajlar: 81
Kayıt: 20 Eki 2011, 21:52

Re: Heritage & Savoir-Faire Part 2: The Concord C1 Tourbillo

Mesaj conbay » 16 Tem 2012, 23:08

very fantastic watch and good photos thanks pifpaf

diamonds are a unique standing :champ:
"Dalgalandığın yerde ne korku, ne keder...
Gölgende bana da, bana da yer ver !
Sabah olmasın, günler doğmasın ne çıkar.
Yurda ay yıldızın ışığı yeter."
Arif Nihat Asya
Kullanıcı avatarı
conbay
 
Mesajlar: 520
Yaş: 37
Kayıt: 23 Kas 2011, 04:17
Konum: Ankara

Re: Heritage & Savoir-Faire Part 2: The Concord C1 Tourbillo

Mesaj pifpaf » 17 Tem 2012, 13:05

Thanks. :thumbup:
Kullanıcı avatarı
pifpaf
 
Mesajlar: 81
Kayıt: 20 Eki 2011, 21:52

Re: Heritage & Savoir-Faire Part 2: The Concord C1 Tourbillo

Mesaj herofb » 17 Tem 2012, 14:31

very fantastic pics and review but to be honest I do not like Concord watches (including this one)

Thanks pifpaf :champ:
Kullanıcı avatarı
herofb
 
Mesajlar: 9376
Yaş: 42
Kayıt: 11 Nis 2010, 16:12


  • Similar topics
    Cevaplar
    Görüntüleme
    Yazar

Dön TSF Watchonista Saat İncelemeleri - Watchonista English Reviews

Kimler çevrimiçi

Bu forumu gezen kullanıcılar: Hiç bir kayıtlı kullanıcı yok ve 20 misafir

   
   
TSF Partner Brands & Medias
Ancon
Arnold & Son
Ateliers deMonaco
Audemars Piguet
Badollet Geneve
Bell & Ross
Breitling
Chopard
Concord
Gucci
Hautlence
Hublot
Linde Werdelin
Maîtres du Temps
Manufacture Royale
Oris
Parmigiani Fleurier
Snyper Geneve
Steinhart
Watchonista
                                          

     Facebook  Twitter  Instagram  Youtube  RSS Portal    |    Gallery    |    Blog    |     Advertise / Reklam / Contact      
 

All brand names and trademarks are the property of their respective owners